Key Highlights

● Third-quarter net Earnings rose from a year earlier despite lower large-agriculture shipments.

● Management still believes this year will mark the bottom of the agricultural equipment cycle.

● Fiscal-year net earnings guidance is between $4.75 billion and $5 billion.

● Tariff recoveries helped results, while Brazil and Europe remain softer than the United States.

Deere & Company (NYSE:DE) is closing its fiscal year with a message it has repeated for months: management believes this year marks the bottom of the current agricultural equipment cycle. The line came from Chief Executive Officer John C. May in the company's most recent quarterly report, which showed higher quarterly net earnings than a year earlier even though shipments of its largest farm machines fell.

The company's fiscal year ends around the start of November, which means the full-year report is the next major disclosure on its calendar. Until then, the third-quarter release remains the freshest detailed account of how the Business is performing, and it contains the full-year earnings range that management is working toward.

What did Deere report for its most recent quarter?

The company reported third-quarter net earnings of about $1.38 billion, or $5.10 per share, compared with roughly $1.29 billion, or $4.75 per share, in the same quarter a year earlier. The quarter ended in early August and the release was dated August twentieth.

Net sales and revenues rose by about 5% to roughly $12.6 billion. Net sales of equipment, which exclude financial services revenue, were about $11 billion, up from roughly $10.4 billion a year earlier. The gain was modest, but it marked growth at a time when the company had warned of a down year.

For the first nine months, net earnings were about $3.8 billion, slightly below the roughly $4 billion a year earlier, while net sales and revenues for the period rose by about 7%. The pattern, with sales higher and earnings lower over nine months, points to cost pressure and mix effects.

Why did large-agriculture shipments decline?

Production & Precision Agriculture, the unit that supplies the largest tractors, combines and planting equipment, reported lower sales for the quarter. The company attributed the decline to reduced shipment volumes, partly offset by better price realization and favorable currency translation. Operating earnings in the segment also fell.

The reasons for the earnings drop were lower volumes, an unfavorable sales mix and higher production costs. Price realization and currency partly offset those items. Large machines carry high Revenue per unit, so even a modest fall in unit shipments can reduce segment earnings noticeably, particularly when factory costs are rising.

Farm customers order big equipment when crop prices and farm Cash Flow are healthy, and delay orders when they are not. Coverage from late last year described farmers as slow to place orders, in part because of tariffs, uncertain export flows and a farm economy that had not regained traction, all of which weighed on large-machine demand.

What does the bottom-of-the-cycle comment mean?

Equipment makers describe Demand in cycles, with troughs followed by recoveries. When Mr. May says he believes this year will mark the bottom, he is saying that orders and shipments should stop declining and begin to stabilize. He cited early order program trends, improving used-equipment inventories and growing adoption of advanced technology as reasons for confidence.

Early order programs are a useful signal in agriculture because they let dealers and farmers commit to machines before a production season begins. Used-equipment inventories matter because a glut of secondhand machines can undermine new equipment sales. The company said those inventories are improving.

The statement is a management belief and not a guarantee. Cycle bottoms are usually clear only in hindsight, and the same wording has appeared in the company's commentary for a while, so readers should treat it as a stated view that later results will either confirm or contradict.

How have Tariff recoveries affected results?

Deere recorded tariff recoveries of about $110 million in the third quarter and roughly $382 million over the first nine months of the year. A recovery reflects credits for duties previously paid and boosts reported earnings in the period recognized.

The release notes that prior-period results were also affected by special items, which complicates year-over-year comparisons. Anyone comparing this year's figures with last year's should adjust mentally for those one-time pieces before concluding that the underlying business has improved or weakened.

Tariffs have been a major theme in Deere's commentary. Late last year, news coverage reported that the company expected tariff-related costs of about $1.2 billion before taxes in the following fiscal year, a large figure against annual earnings of about $5 billion. The recoveries this year are a partial counterpoint to that earlier cost pressure.

What guidance does Deere currently give?

The company guides to fiscal-year net earnings attributable to Deere & Company of between $4.75 billion and $5 billion. That range sits above the opening range the company gave last November, which was $4 billion to $4.75 billion according to news reports at the time.

In February, after the first quarter, the company lifted its range to between $4.5 billion and $5 billion. First-quarter net earnings had been about $656 million, below the prior-year figure, while revenue rose by about 13%. The range has therefore moved up in two steps this year.

Raising guidance twice while maintaining the bottom-of-cycle message is consistent with a business in which results are tracking better than first feared. It does not alter the fact that the full-year number is expected to be below the roughly $5 billion earned in the prior fiscal year at the midpoint.

How did last year end and what was said about the year ahead?

Last November, Deere reported fiscal fourth-quarter net earnings of roughly $1.065 billion and full-year earnings of about $5.027 billion. News coverage described the opening guidance as below the average estimate from a data provider, and the stock fell as much as several percent that day.

Management then said it expected sales of large agricultural equipment in the United States and Canada to fall by between 15 and 20% in the year just ending, while South America was expected to be flat. Mr. May described a period of heightened uncertainty driven by tariffs, trade flows and a farm economy seeking traction.

A government relief package for growers, which the agriculture secretary said would begin paying out in early January, was part of the landscape at the time. A research firm quoted in coverage warned that such programs might provide only temporary support. These details come from reporting at the time, not from the latest release.

Why do Brazil and Europe matter?

In the latest release, Mr. May said the quarter reflected resilience across the portfolio, helped by stable conditions in the United States and by the company's ability to manage softer conditions in Brazil and Europe. The remark places the weakness outside North America in the foreground.

Brazil is a major market for large agricultural machines, and demand there depends on crop prices, financing costs and currency movements. Europe has its own constraints, including regulation, weather and farm economics. Weakness in these regions limits how fast global Volume can recover even when American demand steadies.

Currency adds another layer. A stronger dollar makes American machines more costly abroad, while a weaker dollar flatters foreign sales when translated into dollars. The latest release credits favorable currency translation in the large-agriculture segment, a reminder that reported results mix operating performance and exchange-rate effects.

The release does not break out regional shipments in the portions reviewed, so readers cannot quantify the contribution of each market. What is clear is that management treats these regions as a drag that has been absorbed rather than resolved.

What about small agriculture, construction and financial services?

Deere also reports results for Small Agriculture & Turf, Construction & Forestry and Financial Services.

What can be said is structural. Small agriculture and turf equipment goes to livestock farmers, landscapers and homeowners and tends to follow consumer and housing activity. Construction and forestry equipment follows building activity and public works. Financial services earns from lending to customers who finance equipment.

Financial services deserves separate mention. The unit finances retail equipment loans and dealer inventory, and its results depend on interest rates, Credit losses and the volume of equipment moving through dealers. In a period when machine sales are soft, finance results can provide a degree of ballast, though they cannot fully offset a downturn in the core equipment business.

Each of these units diversifies the company away from the large-machine cycle. Readers who want precise figures should consult the segment tables in the company's filing, where results and management commentary for each unit are laid out in detail.

Why is the technology angle part of the story?

Mr. May cited growing customer adoption of advanced technologies as one reason for confidence. Deere has pushed precision application, automated guidance and software-based services for years, and it describes these as a source of recurring value beyond machine sales.

The company's commentary also credits sustained research spending through the cycle. In the February release, management said continued spending on Research and Development was producing measurable results ahead of new product launches across segments. That is a statement about direction, not a quantified claim.

For farm customers the pitch is that technology can reduce input costs and improve yields, which helps justify spending even when margins are tight. For the company, it is a way to differentiate in a market where customers compare machines closely.

What does the sector context look like for Deere & Company?

Readers following Industrial Stocks will recognize the pattern: manufacturers of heavy equipment are reporting divergent trends, with electricity and infrastructure-linked lines strong and agricultural machinery in a trough. Deere sits at the weak end of that divergence, which is why the bottom-of-cycle message draws such attention.

Competitors have pointed to uncertainty as well. News coverage last year quoted a rival as noting ambiguity in the terms of a trade agreement between Washington and Beijing, and reported that Chinese takes of American soybeans had been slow to accelerate. Export demand is one of the levers that affects farm incomes.

Seen from the dealer lot, the cycle shows up in inventory. Dealers order fewer new machines when used equipment is plentiful, and manufacturers adjust production to avoid building ahead of demand. The company has said used-equipment inventories are improving, which, if sustained, would reduce one of the brakes on new orders.

Because farm incomes depend on weather, prices, trade and interest rates, no single report can resolve the question of timing. The latest data from Deere is best read as one data point among many.

What are the main uncertainties for Deere & Company?

The first is whether order programs convert to firm demand in the next season. The second is the evolution of tariffs and trade arrangements, which have affected both Deere's costs and its customers' export markets. The third is credit, since financing terms influence equipment orders.

A fourth is mix. Even if volumes stabilize, a shift toward smaller or lower-priced machines could keep margins under pressure. The company's most recent release cites unfavorable mix as a reason for lower segment earnings, so this is not hypothetical.

Weather also matters. A poor growing season can cut yields and delay orders, while a strong one can lift farm incomes but depress crop prices through oversupply. Neither outcome is controllable by the company, which is why management speaks about trends in orders rather than committing to specific volumes.

Finally, there are one-time items. Tariff recoveries and other special items make year-over-year comparisons less clean.

What is next on the calendar?

The next major disclosure is the fiscal fourth-quarter and full-year report, which typically arrives in the second half of November. It will show whether the company landed within the range it has been guiding to and will probably include its first view of the following fiscal year.

The release will also show how the company closed the year in its financial services unit and how tariff recoveries evolved in the final quarter. Together with the guidance for the coming year, those figures will indicate whether the bottom-of-cycle message stays valid in the company's own numbers.

That first view is often the most scrutinized part of the release, as last year's reaction showed. Readers may want to compare the new range with the current one and look at what management says about order books, used inventories and tariff costs.

Deere is a member of the Dow Jones average, so its guidance is often cited in market summaries.