Key Highlights
- Modine (NYSE:MOD) reported fiscal second quarter 2027 net sales of USD 994.4 million, up 35%, with Data Centers Revenue up 95% to USD 439.7 million, while net Earnings fell 32% to USD 30.3 million.
- Manitowoc (NYSE:MTW) reported third quarter 2026 orders of USD 676.4 million, up 37.6%, lifting Backlog to USD 1,110.9 million and prompting a higher full-year adjusted EBITDA range of USD 160 million to USD 175 million.
- Mayville Engineering (NYSE:MEC) grew third quarter net sales 18.1% to USD 170.4 million, with Datacenter and Critical Power up 64.9%, yet Net Income was only USD 0.4 million, or USD 0.02 per diluted share.
- Core Molding Technologies (NYSEAMERICAN:CMT) saw total net revenue rise 54.4% to USD 90.2 million as tooling revenue reached USD 25.4 million, but gross Margin slipped to 14.8% from 17.4% and diluted EPS fell to USD 0.17.
Modine (NYSE:MOD): Data Center Cooling Lifts Sales, a Spin-Off Tax Charge Cuts Earnings
Modine (NYSE:MOD) reported results on November 3, 2026, for the quarter ended September 30. Net sales rose to USD 994.4 million from USD 738.9 million, as Data Centers segment sales nearly doubled to USD 439.7 million on hyperscale Demand and Commercial HVAC rose 23% to USD 285.5 million. Net earnings fell 32% to USD 30.3 million because of USD 29.5 million of income tax expense tied to Legal entity restructuring for the spin-off of Performance Technologies, completed on October 1. GAAP Earnings Per Share were USD 0.56 versus USD 0.83, while adjusted earnings per share rose 27% to USD 1.35 and adjusted EBITDA rose 31% to USD 136.2 million. Gross margin fell 160 basis points to 20.7%, with lower margins in all three segments from higher material, component and Tariff costs, and Data Centers gross margin slipped 470 basis points to 19.7%. Free Cash Flow for the six months was a use of USD 145.6 million, and net Debt was USD 573.7 million. The new outlook for the continuing Business is net sales of USD 3.1 billion to USD 3.2 billion and adjusted EBITDA of USD 470 million to USD 500 million.
Manitowoc (NYSE:MTW): Orders Jump 37.6% but Conversion Is the Test
Manitowoc (NYSE:MTW) announced third quarter 2026 results on November 3, 2026. Orders reached USD 676.4 million, and backlog of USD 1,110.9 million has grown over four consecutive quarters, which management tied to crane demand in the Americas, Middle East and Asia Pacific. Net sales rose 10.9% to USD 613.8 million from USD 553.4 million, though non-new machine sales, which include aftermarket work, fell 1.9% to USD 174.1 million. Net income more than doubled to USD 11.0 million, or USD 0.30 per diluted share, and adjusted EBITDA rose 39.0% to USD 47.4 million. Gross Profit was USD 121.8 million against USD 102.6 million, a margin of about 19.8% against 18.5% by our simple arithmetic. The company raised its full-year adjusted EBITDA range to USD 160 million to USD 175 million from USD 150 million to USD 170 million. The release table lists net sales guidance of USD 2.3 billion to USD 2.4 billion in the prior-guidance column, so readers should confirm it in the full release. Inventories rose to USD 813.4 million from USD 683.9 million, cash fell to USD 64.7 million, and tariffs, Inflation and Supply chain constraints can slow backlog conversion.
Mayville Engineering (NYSE:MEC): Datacenter Sales Surge, Launch Costs Absorb the Gain
Mayville Engineering (NYSE:MEC) announced third quarter 2026 results on November 3, 2026, for the three months ended September 30. Net sales rose to USD 170.4 million from USD 144.3 million. Datacenter and Critical Power sales climbed 64.9% to USD 37.2 million, and Commercial Vehicle rose 34.7% to USD 52.8 million, while Powersports fell 26.9% and Agriculture fell 9.9%. The company manufactures precision metal enclosures, racks and sub-assemblies for power and datacenter customers, plus components for commercial vehicles and other equipment makers. Net income was USD 0.4 million against a loss of USD 2.7 million, and adjusted Diluted Earnings per Share were USD 0.15. Manufacturing margin of USD 18.8 million, or 11.0% of sales, included USD 3.0 million of project launch and outsourcing costs and premium labor. Adjusted EBITDA was USD 17.0 million, a 10.0% margin, and net debt was USD 146.6 million, or 2.9 times trailing adjusted EBITDA. Free cash flow was negative USD 3.3 million. Full-year 2026 guidance includes net sales of USD 630 million to USD 640 million, adjusted EBITDA of USD 48 million to USD 52 million and negative free cash flow of USD 6 million to USD 16 million. The prior ranges were not supplied, so no raise or cut is stated.
Core Molding Technologies (NYSEAMERICAN:CMT): Tooling Revenue Lifts Sales, Mix and Start-Up Costs Hit Margin
Core Molding Technologies (NYSEAMERICAN:CMT) reported third quarter 2026 results on November 3, 2026, with total net revenue of USD 90.2 million, up 54.4% from USD 58.4 million. Most of the jump came from tooling projects, which are customer-funded programs built ahead of a production cycle, and tooling revenue reached USD 25.4 million against USD 4.3 million. Production revenue still grew 19.7% to USD 64.8 million, led by medium and heavy-duty truck sales, while power sports sales fell to USD 13.6 million from USD 17.5 million. Gross margin was 14.8% against 17.4%, and management said it would have been about 18.6% without the tooling mix and Monterrey commissioning charges. Selling, general and administrative expense rose to USD 11.8 million from USD 7.6 million. Diluted earnings per share were USD 0.17 against USD 0.22, while adjusted earnings per share, a non-GAAP measure, rose to USD 0.33 from USD 0.24. Cash fell to USD 5.4 million from USD 38.1 million at December 31, 2025, with USD 4.8 million drawn on the revolver. Management reiterated 2026 sales of flat to up about 5% and gross margin of 16% to 17%, with the fourth quarter possibly below that range.
Where Things Stand
Sales grew faster than profit because of a one-time tax charge at Modine and a mix of launch, tooling and tariff costs elsewhere. Modine (NYSE:MOD) still grew adjusted EBITDA 31%, so the 32% earnings drop is largely a spin-off accounting item. Manitowoc (NYSE:MTW) has the strongest forward signal in its order book, but sales rose only 10.9% and inventories grew. Mayville Engineering (NYSE:MEC) turned a loss into a small profit, while launch costs and 2.9 times Leverage limit the gain. Core Molding Technologies (NYSEAMERICAN:CMT) saw revenue boosted by tooling, and its cash balance of USD 5.4 million is thin. The supplied material has no trading Volume data, so thin-trading risk for the smaller names cannot be assessed. This is information only, not a recommendation.


_11_20_2026_14_55_23_118425.jpg)



Please wait processing your request...